Top Notch Wiring An Exhaust Fan And Light

The power source there is one power source that is shared with both switches.

Wiring an exhaust fan and light. Remove the outer jacket from all the cable ends using the cable ripper or the razor knife. Connect the hot wire from the fan to the black wire from the switch and the hot wire from the light to the. Wiring a new exhaust fan with a heater and a light requires an understanding of how the electrical circuits control the fan heater and light.

To wire an exhaust fan and light fixture to a single switch you have to find a way of connecting the fan and light. You can do this in the switch box or by running a length of wire through the wall or attic. Locate the switch cable which must be glued through the top or side of the box that serves the fan or the light.

By splicing the ground wires you don t have to cover them but. The first step is to look at the old exhaust fan wiring. Connect the white wires in the same way then repeat with the ground wires.

You have essentially created two separate circuits within the connection box. How to wire switches for an exhaust fan. Look at the way your old exhaust fan.

There are several variations that you may find in your bathroom. Using wire strippers peel an inch of insulation from the end of the black and white wires. Wiring an exhaust fan with a light fixture using a combo switch as long as the bathroom exhaust fan and light have separate wire leads or connections in the exhaust fan junction box then a separate wire will be necessary for the separate control for the light fixture.

The operation involves making pigtails so it s a good idea to know how to do that. Connect a light and a fan to a new switch. To provide gfci protection for an exhaust fan the incoming circuit power connects to the line side of the gfci outlet then the wires for the exhaust fan connect to the load side of the gfci outlet.