Unbelievable Hooking Up A Light

For a safe outdoor connection cover the twisted together wire ends with silicone grease before screwing on the terminal cap.

Hooking up a light. Skip navigation sign in. Well here in the netherlands the middle terminal of the li. We got this traffic light from a surplus store and decided to use it as a lamp.

This video is unavailable. Align the head of the screw into the wider part of the hole and twist the fixture to the narrower part. You must connect both wires to ground or your lights will not have a proper grounded connection back to the house.

Turn off the electrical breaker for the circuit to the existing light fixture. Most light fixtures will have a keyhole shaped hole. How to wire up led lights with a battery basic wiring you must use a resister to lower the power and must send the current in a circle.

Use needlenose pliers to make a loop out of the bare wire and fit that loop around the screw. The next video is starting. Screw on and tighten the mounting nut.

You can also buy caps preloaded with grease for weatherproof installations. If the breakers aren t labeled ask a family member to turn on the light with the switch as you cycle through the. If you re using a center mounted ceiling light slide the canopy onto the rod so the nipple shows through the center hole.

Tighten the mounting screws. Twist the two white wires together and cover them with a terminal cap.