Beautiful Work 3 Wire Dimmer

Traveler wires are interchangeable on each switch.

3 wire dimmer. Twist the ends together clockwise and cap them using a wire connector nut. 3 way switches are also marked with four wires in the wall outlet. Connect the ground wire from your dimmer to a green or bare copper wire in the wall box.

Along with hot and neutral the dimming signal is communicated via a third wire called dimmed hot. The 3 way dimmer and 3 way switch are also interchangeable. The common terminal of the 3 way switch connects to the light fixture s.

3 wire control is a line voltage phase control dimming method. Three wire control is stable over long wire runs allows for maximum circuit loading and is very easy to wire. A 3 wire nm connects the travelers of the dimmer to the travelers of the 3 way switch.

A ground wire a hot lead wire and two travelers to allow for a connection to another switch or outlet. Remove 3 4 inch of casing from the end of the house wires if needed. How to wire a 3 way dimmer with wire leads.

The green ground lead attaches to the switch box ground wire the red and white travelers are attached to the pair of red leads and the black lead is connected to the power or switch leg connected at the fixture s. Connect each dimmer wire to a house wire by gripping the wire ends with a pair of pliers and twisting them together. One 2 core earth cable takes live and neutral to the switch back.

Make sure the electricity. All three wires are rated class 1 and can be run within the same conduit. One example of a 3 wire lighting system.